The main component of the enamel bolted tank is the enamel assembled board, and the appearance is often blue or green. Therefore, the manufacturer of the enamel bolted tank usually uses transparent coat and enamel pigment (blue pigment or green pigment) in the selection of cover coat. In this way, once the white spot defect appears on the enamel assembly board, it will be very obvious, and the enamel factory needs to spend a lot of time and energy to solve the problem.

Some time ago, a foreign customer approached us about the white spot defect in the blue enamel of the enamel bolted tank. After understanding the situation, Nolifrit sent a blue direct-on enamel sample according to customer needs. After receiving the sample, the customer immediately started the test, and the first test was successful. The surface of the sample was smooth, the blue appearance was beautiful, and the adhesion and gloss were good. After several tests, there were no problems, and the desired effect of the customer was fully achieved. The customer was very satisfied and immediately placed an order for 5 tons of this product.

Why is Nolifrit blue direct-on blue enamel able to succeed abroad?

1. Cost-effective enamel to meet customer needs. As a Chinese enamel frit brand, Nolifrit enamel frits can be exported to more than 30 countries and serve 500+ enamel enterprises. It is precisely because we have cost-effective products and excellent technical services, Nolifrit enamel frit is in raw materials, production process The four links of product quality inspection and user feedback are strictly reviewed. A brand can be recognized and recommended by users only when its products and services have passed the test.

2. Reduce the enameling process and save costs. The customer originally used the two-enamelling and two-firing process, and the Nolifrit cover coat only needs to be enamel-firing once to achieve the effect, which reduces the consumption of glaze and energy;

3. Effectively prevent the occurrence of enamel defects and improve the product qualification rate. Nolifrit itself is of good quality and can resist the defects that are more likely to occur in the production process. It also avoids other defects caused by operational errors due to the reduction of the process.